Ford Probe, Mazda 626 & MX6 FAQ


B) Sourcing Components & Regular Maintenance


Rear Hatch Struts - Probe (all)

Problem
    Over time rear hatch gas-lift struts become weak, such that the hatch will no longer stay raised. The cause is from loss of pressure in the gas charged struts, themselves subject to temperature variation between winter/summer.

Solution
    NAPA, USA offer replacement hatch struts (circa $27.82 each):
    93-ProbeGT Without Spoiler - BK.819-5555 & BK.819-5556
    93-ProbeGT With Spoiler - BK819-5608 & BK819-5609
    Note that Left & Right struts differ.

Installation Notes
    Two people are required for safe fitting, as the 100kg hatch must be held up during the procedure. It may be possible to fit one at a time, but care is required whilst working to avoid damage to oneself & rear window glass.

    Torque figures for the fasteners:
    Body Fitment end - 8.9-12.7Nm
    Hatch Fitment end - 16-22Nm



Ford Probe, Mazda 626 & MX6 FAQ

Last Upload: 31st January, 2002. V1.50a
URL: http://homepage.ntlworld.com/dorothy.bradbury/probemx/p_m15.htm